SECURITY CAMERA INSTALLATION SERVICES
Commercial & Residential CCTV Surveillance
Insured, Background-Checked, Nationwide
Professional security camera installation for business and home properties, in all 50 states.
Commercial CCTV Security Camera Installation for Business and Multi-Site Operations
Our commercial security camera installation crews work on retail floors, warehouses, restaurants, dealerships, self-storage, contractor yards, medical offices, schools, hotels and industrial sites. The work is the same discipline we bring to every other install: a site walk before anything gets mounted, cable runs that follow the building instead of fighting it, and a documented handoff so the next person who touches the system knows what was done.
Business camera projects fail for boring reasons. A camera gets aimed at a doorway that backlights every face walking through it. A cable run gets pulled past 100 meters and the link negotiates down or drops entirely. A recorder gets sized for eight cameras and the customer adds six more the following spring. We scope for the building you will have in three years, not the one you have on survey day.
- Indoor and outdoor IP camera mounting, aiming and focus
- Structured Cat6 cabling, conduit, J-hooks and penetration sealing
- PoE and PoE+ switch sizing, VLAN separation and static addressing
- NVR, VMS and hybrid cloud recorder installation and configuration
- Analog to IP migrations that reuse existing coax where it makes sense
- Multi-site rollouts with one point of contact and identical documentation per location
- Remote viewing, user accounts, role permissions and retention policy setup
- Coordination with your alarm, access control or POS vendor at cutover
Real Reviews From Customers Nationwide
What a Commercial Camera Installation Includes
Every commercial security camera installation is quoted per site after a survey, and the quote is the price. There is no trip-charge surprise at the end and no line item that appears after the crew is already on the roof.
- Pre-install site survey with a camera-by-camera coverage plan
- Field of view and mounting height chosen per camera
- Weather-rated exterior mounting, sealed penetrations, drip loops
- Clean, labeled cable management at both ends of every run
- Recorder configuration, time sync, retention math and health alerting
- Remote access for owners, managers and monitoring staff
- Written as-built notes and photographs of every camera position
- One-year workmanship guarantee on the installation
NDAA Section 889 and Whether Your Cameras Are Allowed to Stay
This is the part most camera pages leave out, and it decides whether a system is worth installing at all on some properties.
Section 889 of the fiscal 2019 National Defense Authorization Act names five companies whose equipment federal agencies and federal contractors may not buy or use: Huawei, ZTE, Hytera, Hangzhou Hikvision and Dahua. The split between them matters. For Huawei and ZTE the telecommunications equipment is covered outright. For Hytera, Hikvision and Dahua it is video surveillance and telecommunications equipment used for public safety, for security of government facilities, for physical security surveillance of critical infrastructure, or for other national security purposes. The prohibition covers purchase, lease and use, not just new procurement. Related rules reach further than most owners expect: federal grant recipients are covered through the Uniform Guidance at 2 CFR 200.216, and schools drawing E-Rate funding through the FCC’s own rules.
We do not sell cameras, so we have no reason to push you toward one badge over another. What we do is check the make and model of whatever you own or plan to buy against the covered list before a single bracket goes on the wall. If you hold federal work and the existing system is covered equipment, that is a replacement conversation, and it is better to have it during the survey than during an audit.
The Network Is Where Camera Projects Actually Go Wrong
Most of what separates a camera system that works from one that frustrates everybody is decided before the first camera is mounted.
Power budget. IEEE 802.3af delivers 15.4 watts at the switch port and about 12.95 watts at the camera. That is enough for a fixed dome. It is not enough for a PTZ, a camera with a heater and blower for winter, or an illuminator that runs all night. Those need 802.3at PoE+ at 30 watts, and larger PTZ units need 802.3bt. A switch with eight PoE ports and a 60 watt total budget will not run eight PoE+ cameras no matter what the port count says.
Distance. Ethernet over twisted pair is a 100 meter channel, roughly 328 feet, and that includes the patch cords at both ends. Past that you need a switch closer to the cameras, a fiber run, or a PoE extender. Guessing at this is how a camera at the back of a lot ends up working in October and failing in July.
Storage. Retention is arithmetic, not a setting. A 4 MP camera recording continuously at about 4 Mbps produces roughly 43 GB per day. Eight of those cameras kept for 30 days is about 10 TB before you allow any headroom. H.265 encoding cuts that close to half compared with H.264, and recording on motion or event rather than continuously cuts it much further, but the number has to be worked out before the recorder is bought rather than after the drive fills.
Interoperability. ONVIF is what lets cameras from one manufacturer record to a recorder from another. Profile S covers streaming, Profile G covers recording and retrieval, and Profile T covers H.265 and advanced streaming. A camera advertised as ONVIF compatible without a named profile is telling you very little, and that is worth knowing before the order is placed.
Weather and impact ratings. IP66 means dust-tight and able to take a powerful water jet. IP67 adds temporary immersion. IK10 means the housing is rated for a 20 joule impact, which is the rating that matters on a loading dock or in a school corridor at eye level.
Multi-Site Rollouts
If you run more than one location, the value is not in any single install. It is in every location being built the same way, so a manager who transfers between sites already knows the system and a technician dispatched to site nine is not reverse-engineering choices made at site one.
We assign one point of contact for the whole security camera installation rollout, standardize camera models, mounting heights, naming conventions and retention settings across the estate, and schedule around your operating hours so nothing closes for the install. Each site comes back with the same documentation package. Where a location has no usable wired internet, we can bring the connectivity as part of the same project, which is the piece most camera contractors have to subcontract out.
Cameras at Remote Sites, Where Bandwidth Is the Constraint
Construction yards, ranches, well pads, storage lots, marinas and rural facilities are where camera projects most often stall, because there is nothing to plug the recorder into.
We install Starlink for exactly these sites, so the connectivity and the cameras can go in on the same visit. The engineering point worth knowing early: satellite upload is a fraction of satellite download, and every camera streaming to a cloud service consumes upload continuously. A single 4 MP stream at 4 Mbps means four cloud cameras need about 16 Mbps of sustained upload before anyone at the site opens a laptop. The design that holds up is a local recorder capturing everything on site, with the link used for live viewing, event clips and health alerts rather than for pushing every frame off the property. Where two buildings need to share one connection, a point to point wireless bridge usually beats trenching.
Home Security Camera Installation
Residential jobs are smaller, but the parts people get wrong are the same parts.
Most homeowners buy a good camera kit and then mount it too high, which turns every face into the top of a head. Or they mount an infrared camera under a porch soffit, and at night the ceiling reflects the IR straight back into the lens and washes out the image. Or they run the cable along the outside of the siding because there was no plan for getting through the wall. None of these are equipment problems.
Our residential installers handle the whole job: mounting height and angle chosen per camera, cable routed inside the wall or concealed where it cannot be, penetrations sealed properly, the recorder or base station set up somewhere it will not cook itself in a closet, and the phone app configured and tested with you before the crew leaves.
- Doorbell, indoor, outdoor and driveway camera installation
- Wired PoE systems, wireless systems and hybrid setups
- DVR and NVR installation, plus cloud and local storage configuration
- Night vision aiming and IR reflection troubleshooting
- Motion zones and alert tuning so the phone stops buzzing at every passing car
- Mobile app setup, remote viewing and family user accounts
- Concealed cable runs and sealed exterior penetrations
- Wi-Fi coverage checks and access point placement where wireless cameras are used
We work with the system you already chose or already own. If you have not bought yet, describe the property and we will tell you what the site actually needs before you spend anything.
How a Security Camera Installation Works
1. Site survey
We walk the property, in person or by doing a complimentary virtual site survey for smaller residential jobs, and map where each camera needs to see. Entry points, blind spots, sun angles at the hours that matter, lighting after dark, mounting surfaces, cable paths, power, and where the recorder is going to live. You get a camera-by-camera plan and a firm price before anything is ordered or scheduled.
2. Installation
Insured, background-checked technicians mount and aim every camera, pull and terminate the cabling, seal every exterior penetration, and set up the recorder and network. Exterior work follows the same standards as the rest of our install practice: no drilling through a roof plane where a wall or fascia mount will do the job, sealed entries, and drip loops on every run.
3. Configuration and handoff
Recording schedules, retention, motion zones, alerts, user accounts and remote access get configured and then tested with you watching. We walk the finished system with you, hand over the as-built notes and photographs, and leave the credentials with you rather than keeping them.
Why Property Owners Choose Nationwide Installation Techs
- Our own background-checked technicians, in all 50 states
- At least $1 million in liability coverage carried per technician
- 4.9-star Google rating from 90+ reviews
- The same technician network behind 3,000+ satellite internet installs
- Firm per-site pricing quoted up front, with no surprise fees
- One-year workmanship guarantee on every installation
- Camera work and site connectivity from one company, on one schedule
- Typical response to a quote request in under five minutes
Licensing, Insurance and Permits
Security camera installation sits under low-voltage and alarm licensing rules that vary considerably by state, and some jurisdictions treat camera-only installs differently from systems tied to alarm monitoring. We confirm what your jurisdiction requires and make sure the crew assigned to your site holds it before the job is scheduled, rather than discovering it on the day.
Any reference to certified technicians on this site refers to our in-house certification program, described in the disclaimer at the foot of this page.
Security Camera Installation FAQs
Do you install security cameras for both businesses and homes?
Yes. We handle commercial security camera installation for single sites and multi-location rollouts, and residential installs from a single doorbell camera to a full multi-camera system with a recorder. Both are booked through the same number and quoted the same way, per site after a survey.
How much does security camera installation cost?
Pricing depends on camera count, cable run lengths, mounting surfaces, whether conduit is needed, and how the recorder and network are set up, so we quote per site after the survey rather than publishing a flat rate that would be wrong for most properties. The quote you approve is the price you pay, and any travel or complexity is priced into it up front.
Can you install cameras I already bought?
Yes, and most of our residential work is exactly that. Bring your own kit and we handle the mounting, cabling, recorder, network and app setup. If you have not bought yet, tell us about the property first and we will spec what fits before you order.
What brands and systems do you work with?
We install and configure systems from the major commercial and consumer manufacturers, and the practical test for mixing equipment is ONVIF conformance rather than the badge on the housing. Tell us what you own or are considering and we will confirm compatibility before anything is ordered.
Are your cameras NDAA compliant?
We are installers rather than a hardware brand, so the compliance question belongs to the equipment you choose. What we do is check it for you. Section 889 of the fiscal 2019 NDAA bars federal agencies and federal contractors from buying or using covered equipment from Huawei, ZTE, Hytera, Hikvision and Dahua, with the three video surveillance makers covered where the equipment is used for public safety, government facility security, critical infrastructure surveillance or other national security purposes. Grant recipients are reached separately, through the Uniform Guidance at 2 CFR 200.216. We flag covered equipment during the survey rather than after it is installed.
How long does a security camera installation take?
A straightforward residential system of four to six cameras is usually a single day. Commercial sites depend on cable run lengths, ceiling and wall construction, and how much conduit is involved, and a survey gives you a firm schedule rather than an estimate. Multi-site rollouts run parallel crews so the whole estate finishes on one timeline.
Do you run cables inside walls, or does it get surface-mounted?
Concealed wherever the construction allows it, and that is decided at the survey rather than on the day. Where a wall cannot be fished, we use conduit or raceway routed along a line that follows the building, and you see the plan before the work starts.
Can I view the cameras on my phone when I am away?
Yes. Remote viewing gets configured and tested with you before the crew leaves, including accounts for whoever else needs access and permissions for what each of them can see. On commercial systems we set role-based access so a shift manager and an owner do not have the same rights.
Will cameras work at a site with no internet service?
The recorder keeps recording locally without internet, but you lose remote viewing and alerts. For sites with no usable wired service we install satellite internet and the camera system on the same project, which is a common combination on ranches, yards, storage lots and remote facilities.
How much recording history will I keep?
That is arithmetic we do at the survey. It depends on camera resolution, frame rate, encoding, whether you record continuously or on motion, and how much drive space the recorder holds. As a rough anchor, a 4 MP camera recording continuously at about 4 Mbps uses roughly 43 GB a day, so eight of them held for 30 days is around 10 TB. We size the recorder to the retention you actually want, not the other way round.
Do you service multiple states for one company?
Yes. We operate in all 50 states with our own technicians, which is what makes a standardized multi-site rollout possible: same models, same mounting heights, same naming conventions, and the same documentation package at every location. See Locations We Serve for statewide coverage.
What happens if something stops working after the install?
Every installation carries a one-year workmanship guarantee. If a mount, a cable run, a termination or a configuration we did is at fault, we come back and fix it. Hardware failures fall under the manufacturer warranty and we will help you work through that process.
Ready to Learn More or Book Your CCTV Installation?
Tell us about the property and what you need to see, and we will put together a security camera installation plan camera by camera, with a firm price. Call, email, or send the form, and a real person gets back to you, typically in under five minutes during business hours.
FREE QUOTE
By submitting your contact information through this website, you agree to be contacted by our company regarding your inquiry. We respect your privacy — your information will not be sold, shared, or added to any third-party marketing lists. Your details are used solely for communication related to our services.
Other Nationwide Installation Services
Disclaimer: Nationwide Installation Techs LLC is an independent business and has no affiliation or official connection with Starlink, SpaceX, or any of their subsidiaries or affiliates. We are not associated with, authorized, endorsed, or sponsored by these companies in any capacity. For official information, please visit the Starlink and SpaceX websites at www.starlink.com and www.spacex.com. The names “Starlink,” “SpaceX,” and any related trademarks, logos, or imagery are the exclusive property of their respective owners.
All security camera, video surveillance and recording hardware brand names referenced on this page are the property of their respective owners. Nationwide Installation Techs LLC is an independent installation company and is not affiliated with, authorized by, or endorsed by any camera or recorder manufacturer.
Any references to “certified” or “certification” on this website refer exclusively to Nationwide Installation Techs LLC’s proprietary in-house technician certification program. This training and certification process was developed by our company based on the experience and installation methods of professional technicians who have collectively completed more than 3,000 successful Starlink installations while maintaining an overall 4.9-star customer review rating. It is not affiliated with, issued by, approved by, or endorsed by Starlink, SpaceX, or any of their affiliates.